LAN machine connection lost following Windows OS update; Machine Connection Sending designs to your Sew Machine via LAN Network - Setup Instructions; Setting Static IP on Tajima MX and MB model Sewing Machines - How to Instructions; Serial Connections. Serial Connection Not Connecting Trouble Shoot Procedure; Networking Errors. If you’re an embroidery beginner this video is for you! So you’ve finally found the perfect embroidery design online and can’t wait to see how it will stitch. Serial Connection Not Connecting Trouble Shoot Procedure Machine Connection Sending designs to your Sew Machine via LAN Network - Setup Instructions TMEX-C901 / TMEX-C1201 / TMEX-1501.
Machine Connections can be handled in a number of ways:
Tajima TMBU-SC series is an embroidery machine that supports not only regular embroidery such as caps and shirts, but also large products such as golf bags and travel carry bags. TFMX-C Series Diversified applications are available to a wide range and variety of products, using a wealth of optional devices. This is done because the problem might have arisen due to a wrong connection of the RS232 cable. The fourth problem that is faced by many users of RS232 to RS485 ports is incorrect pin configuration, or finding it hard to deal with the serial ports' connector genders. This makes it hard for people to 'mate' or connect any devise that uses this.
- If your embroidery machine comes with machine connection software, such as, Ricoma PC Communication Software (EMB_soft.exe) for Ricoma embroidery machine, or “Happy Link” software for Happy embroidery machine, etc., then “Connection Manager” is what you need. Please find out more information by clicking here.
- If your embroidery machine comes with a serial port but no machine connection software, please read the information below:
- Before you can send designs for stitching, you must configure the machine in EmbroideryStudio/DecoStudio. This configuration functionality allows you to add machines, change settings for machines that are already set up, or delete machines that are no longer required.
- EmbroideryStudio/DecoStudio provides alternative means for sending designs directly to the embroidery machine for stitching. Depending on your software options, you can stitch to the machine using either Stitch Manager or Machine Manager.
Your machine must be set up through Stitch Manager if you are sending to Stitch Manager, or Machine Manager if sending to Machine Manager. Maltego xl 4.1 license key.
The following information provides details pertaining to the protocols and settings required for EmbroideryStudio/DecoStudio to connect to embroidery machines.
Select your machine type:
Tajima | Barudan | Toyota | Brother | Happy | SWF | Ricoma | Cable Types
Tajima Machine Connections
Machine Connections can be handled in a number of ways:
Tajima TMBU-SC series is an embroidery machine that supports not only regular embroidery such as caps and shirts, but also large products such as golf bags and travel carry bags. TFMX-C Series Diversified applications are available to a wide range and variety of products, using a wealth of optional devices. This is done because the problem might have arisen due to a wrong connection of the RS232 cable. The fourth problem that is faced by many users of RS232 to RS485 ports is incorrect pin configuration, or finding it hard to deal with the serial ports' connector genders. This makes it hard for people to 'mate' or connect any devise that uses this.
- If your embroidery machine comes with machine connection software, such as, Ricoma PC Communication Software (EMB_soft.exe) for Ricoma embroidery machine, or “Happy Link” software for Happy embroidery machine, etc., then “Connection Manager” is what you need. Please find out more information by clicking here.
- If your embroidery machine comes with a serial port but no machine connection software, please read the information below:
- Before you can send designs for stitching, you must configure the machine in EmbroideryStudio/DecoStudio. This configuration functionality allows you to add machines, change settings for machines that are already set up, or delete machines that are no longer required.
- EmbroideryStudio/DecoStudio provides alternative means for sending designs directly to the embroidery machine for stitching. Depending on your software options, you can stitch to the machine using either Stitch Manager or Machine Manager.
Your machine must be set up through Stitch Manager if you are sending to Stitch Manager, or Machine Manager if sending to Machine Manager. Maltego xl 4.1 license key.
The following information provides details pertaining to the protocols and settings required for EmbroideryStudio/DecoStudio to connect to embroidery machines.
Select your machine type:
Tajima | Barudan | Toyota | Brother | Happy | SWF | Ricoma | Cable Types
Tajima Machine Connections
Tajima Serial Cable
Machine Type | Connection via | Details |
| Tajima machine with a Serial Port | Serial Cable: – Type Q (25 to 25 pin) – Type R (9 pin PC to 25 pin embroidery machine) | Port=COM1/COM2 Protocol=Standard Serial Baud=9600, or 38400 Data bits=8 Stop bits=1 Parity=None Handshaking=Hardware |
Barudan Machine Connections
Machine Type | Connection via | Details |
| Tanto, BEAT, BEVT, BEXY, BEXR | Serial Cable (9 pin) supplied by Barudan | Port=COM1/COM2 Protocol=Standard Serial Baud=9600, or 38400 Data bits=8 Stop bits=1 Parity=None Handshaking=Embroidery Machine |
| BEMS/R, BENS/R, BEZN, BEMAX, BEDS | Serial Cable (25 pin) supplied by Barudan | Port=COM1/COM2 Protocol=Standard Serial Baud=9600 Data bits=8 Stop bits=1 Parity=None Handshaking=Embroidery Machine |
Toyota Machine Connections
Machine Type | Connection via | Details |
| AD800/820/820A/830/850/860, ESP9000, ESP9100 | Serial Cable Type G, H, U, or V | Port=COM1/COM2 Protocol=Toyota Serial Baud=9600, or 38400 Data bits=8 Stop bits=2 Parity=Odd Handshaking=Hardware |
| Alternative settings for AD850/860 | Serial Cable Type G, H, U, or V | Port=COM1/COM2 Protocol=Toyota Serial Baud=9600, or 38400 Data bits=8 Stop bits=2 Parity=None Handshaking=Embroidery Machine |
Brother Machine Connections
Machine Type | Connection via | Details |
| Professional machines except 6-head | Serial Cable – Type H | Port=COM1/COM2 Protocol=Standard Serial Baud=9600 Data bits=8 Stop bits=1 Parity=None Handshaking=Embroidery Machine |
| Brother 6-head | Special Controller Board, Cable and Software from Brother | Not applicable |
Happy Machine Connections
Machine Type | Connection via | Details |
| HCG / HCG-B / HCA (controller HMS702C and HMS802) | Serial Cable: – Type G (25 to 25 pin) – Type U (9 pin PC to 25 pin embroidery machine) | Port=COM1/COM2 Protocol=Standard Serial Baud=9600 Data bits=8 Stop bits=1 Parity=None Handshaking=Embroidery Machine |
| HCS | Serial cable is supplied with the embroidery machine | Port=COM1/COM2 Protocol=Standard Serial Baud=38400 Data bits=8 Stop bits=1 Parity=None Handshaking=Hardware OR Embroidery Machine (both work) Machine Format=Happy or Tajima |
| HCD2 | Connection Manager via Happy LAN | Connection Manager |
| HCR2 | Connection Manager via Happy LAN or Happy Link | Connection Manager |
SWF Machine Connections
Machine Type | Connection via | Details |
| SWF machines with a Serial Port | Serial Cable – Type V (9 pin) | Port=COM1/COM2 Protocol=Standard Serial Baud=38400 Data bits=8 Stop bits=1 Parity=None Handshaking=Hardware |
Ricoma Machine Connections
Machine Type | Connection via | Details |
| Ricoma | Connection Manager via Ricoma PC Communication Software | Connection Manager |
Tajima Serial Connection Software
Serial Cable Types
